Heat Press Instructions for DTF Transfers
Heat Press Instructions for DTF Transfers
This is all you need.
Any Garment
Your DTF Transfer
Heat Press
1. Position Your Design
Carefully position your transfer. If you are not experienced at lining your transfers up, you can use heat tape and pick the garment up to see if that's the placement you're expecting.
2. Press
Press with medium to heavy pressure. Press your transfer at 280°F - 315°F for 8 seconds.
3. Peel!
Release the press, and depending on how small the details in your design are, you can instantly peel or wait until cool. Lift the transfer from one corner and gently peel in one consistent motion. Small details may need to be cold peeled, but most designs can be peeled instantly.
4. Final Press
Place a Teflon sheet (recommended) or parchment/butcher paper to enhance feel, increase durability, and remove shine. Press at the same temperature for 5 seconds.
Order Custom DTF TransfersPressing Cheat Sheet
Download and print the cheat sheet so you always know what settings to use.
Open Pressing Cheat Sheet